Nitrogen Boosting

We supply widespread solutions for the industries of manufacturing, maritime, defense, oil & gas, fire & safety, pet bottle blowing, injection molding, and laser cutting. There are various applications that benefit from nitrogen boosting. We provide systems with capacities from 3.7 to 212 CFM, operating pressures ranging from 120 to 6000 PSI, and engine needs ranging from 1 to 420 hp.

 

Nitrogen is an inert gas. Even when the laser heats the surface to high temperatures, it does not react with the molten metal. Its role in laser cutting is to keep oxygen out of the cutting zone, preventing oxidation and discoloration of the metal. As a consequence, you'll have a clean edge that won't need to be cleaned up after the cutting is complete.

For the tire filling, the main advantage of nitrogen-filling is that they lose tire pressure more slowly than air-filled tires since the gas in the tire exits at a slower rate than air. The theory is that if you keep your tire pressure steady, you'll get greater gas mileage and tire life since you'll always be rolling on fully inflated tires.

W32 Chassis Gas Booster

  • Working Pressure - 225 Bar / 3260 Psi

  • 9-12 CFM / 250-350 lt/min air capacity

  • 5-10 HP / 4-7.5 kW motor options

  • Water and oil separator for 2nd and 3rd stage

  • Pressure maintaining valve

  • Automatic Start / Stop and Drain

  • Pressure switch

  • Oil level switch

  • Control panel

  • Intercooler (Stainless Steel)

  • Aftercooler (Stainless Steel)

  • Starting from: $12,900.00

W32_şaseli_gaz_booster.jpg

W32 Canopy Gas Booster

  • Working Pressure - 225 Bar / 3260 Psi

  • 9-12 CFM / 250-350 lt/min air capacity

  • 5-10 HP / 4-7.5 kW motor options

  • Water and oil separator for 2nd and 3rd stage

  • Pressure maintaining valve

  • Automatic Start / Stop and Drain

  • Pressure switch

  • Oil level switch

  • Control panel

  • Intercooler (Stainless Steel)

  • Aftercooler (Stainless Steel)

  • Starting from: $17,900.00

w32 canopy_plc.jpg

W3 Canopy Gas Booster

  • Working Pressure - 225 Bar / 3260 Psi

  • 27-39 CFM / 760-1100 lt/min air capacity

  • 15-20 HP / 11-15 kW motor options

  • Water and oil separator for 2nd and 3rd stage

  • Pressure maintaining valve

  • Automatic Start / Stop and Drain

  • Pressure switch

  • Oil level switch

  • Control panel

  • Intercooler (Stainless Steel)

  • Aftercooler (Stainless Steel)

  • Starting from: $27,000.00

w3 kanopili gaz booster.jpg

_